Wireless universal transmitter
RF I/O
Thermoplastic enclosure
sWave® wireless technology (SW868/SW915/SW917/SW922)
No wiring and pipe laying required
Power supply by Lithium battery
Easy programming of receiver
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
Variant with SMA connector available for external antenna to increase range
The RF I/O may be used in combination with wireless inductive sensor RF IS or wireless magnetic sensor RF RC M10
Connection of external switching contact (potentialfree contact) with gold contacts possible.
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
ABS, UL 94 HB, RAL 9005
Tightening torque
enclosure mounting screws: max. 1.5 Nm
cover screws: max. 1.5 Nm
Degree of protection
IP65 (IEC/EN 60529)
Voltage source
lithium battery (replaceable)
Connection
4 x plug-in connector M12 x 1, 4-pole
variant "BU":
4 x socket M8 x 1, 4-pole
Connectable devices
RF IS M8, RF IS M12, RF IS M18, RF IS M30, RF RC M10, external switches using the coupling with connecting cable 1215497 or 1262873
Type of installation
mount on an even surface
Mounting position
any
Mounting
screw connection
Ambient temperature
–20 °C … +65 °C
Switching frequency
max. 5 Hz
Standby current
60 µA
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Actuating time
min. 80 ms
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002