Wireless universal transmitter
RF I/O SW915-4E-2,2Ah LBT
Article no.: 1346101
This product is only available on request, please contact our sales team. contact usProduct features
Thermoplastic enclosure
sWave® wireless technology
No wiring and cable laying required
Power supply by Lithium battery
Easy programming of receiver
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
Notes
The RF I/O may be used in combination with wireless inductive sensor RF IS or wireless magnetic sensor RF RC M10.
Connection of external switching contact (potentialfree contact) with gold contacts possible.
The battery must be ordered separately.
Technical data
General technical data
Applied standards
EN IEC 60947-5-1, EN 301 489-3, EN IEC 61000-6-2, EN IEC 61000-6-3, EN IEC 63000
Enclosure
ABS, UL 94 HB, RAL 9005
Tightening torque
enclosure mounting screws: max. 1.5 Nm
cover screws: max. 1.5 Nm
Degree of protection
IP65 (IEC/EN 60529), only with plugged cables and/or with closed protective caps
Connection
4 x plug-in connector M12 x 1, 4-pole, A-coded
Connectable devices
RF IS M8, RF IS M12, RF IS M18, RF IS M30, RF RC M10, external switches using the coupling with connecting cable 1215497 or 1262873
Type of installation
mount on an even surface
Mounting position
any
Mounting
screw connection
Ambient temperature
–20 °C … +80 °C
Telegram rate
max. 12000 telegrams with repetitions/h
Switching frequency
max. 5 Hz
Standby current
60 µA
Switching thresholds
max. switch-on threshold: 2.05 V, 
min. switch-off threshold: 0.95 V
Switch-on delay ton
max. 0.94 ms
Actuating time
min. 80 ms
Switch-off delay toff
max. 94.7 ms
Wireless approvals
USA: FCC-Id. XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Weight
171 g
Wireless technology
Protocol
sWave®
Frequency
915 MHz (USA, Canada, Mexico)
Transmission power
< 25 mW
Data rate
66 kbps
Channel bandwidth
550 kHz
Wireless range
max. 450 m outdoors, max. 40 m indoors
Modulation type
2-FSK
Voltage supply
Voltage source
lithium battery Tadiran TL-5903 (replaceable)
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
2.4 Ah
Alternative voltage supply
Voltage source
lithium battery Tadiran SL-760 (AA), replaceable
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
2.2 Ah
Battery life
depending on the switching frequency and number and type of sensors for 1000 transfers/day and one inductive sensor approx. 300 days; for 1000 transfers/day and one mechanical switch approx. 1400 days
Downloads
Other interesting products
Wireless universal transmitter
RF I/O SW915-4E-2,2Ah LBTArticle no.: 1346101
This product is only available on request, please contact our sales team. contact us









































