Wireless receiver
RF Rx - 4S
sWave® wireless technology (SW868/SW915/SW917/SW922)
4 potential-free relay outputs
4 NO contacts, max. 3 A
Transmitter/receiver assignment by teaching mode
LEDs for indication of switching state
SET: RF magnet antenna is included in delivery
Technical data
General technical data
Applied standards
EN 60947-5-1, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Degree of protection
IP20 (IEC/EN 60529)
Number of channels
4
Mounting
DIN rail mounting
Connection
screw connection terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
Teachable transmitters
40
Outputs
4 NO contacts (relay)
Rated operating current/voltage Ie/Ue
max. 0.1 A/24 VDC -15 % … +10 %;
output contacts: 3 A/250 VAC; 3 A/24 VDC
Utilisation category
AC-15; DC-13
Rated insulation voltage Ui
250 VAC
Rated impulse withstand voltage Uimp
2.5 kV
Display
green LED: ready for operation,
orange LED: signalling of switching state
Telegram rate
max. 12000 telegrams with repetitions/h; SW922: max. 1440 telegrams/h
Degree of pollution
2
Ambient temperature
0 °C … +55 °C or –20 °C … +55 °C (depending on the variant)
Storage and shipping temperature
–25 °C … +85 °C
Note
Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Switching contacts are not suitable for capacitive loads.
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
Approvals
d
Downloads
Other interesting products
Alternative wireless receiver with 4 potential-free relay outputs (4 change-over contacts)
Alternative wireless receiver with RS232 interface and 2 potential-free relay outputs (2 change-over contacts)
