Wireless receiver
RF Rx - 4S
sWave® wireless technology (SW868/SW915/SW917/SW922)
4 potential-free relay outputs
4 NO contacts, max. 3 A
Transmitter/receiver assignment by teaching mode
LEDs for indication of switching state
SET: RF magnet antenna is included in delivery
Technical data
General technical data
Applied standards
EN 60947-5-1, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 61000-4-2, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Degree of protection
IP20 (IEC/EN 60529)
Number of channels
4
Mounting
DIN rail mounting
Connection
screw connection terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
Teachable transmitters
40
Outputs
4 NO contacts (relay)
Rated operating current/voltage Ie/Ue
max. 0.1 A/24 VDC -15 % … +10 %;
output contacts: 3 A/250 VAC; 3 A/24 VDC
Utilisation category
AC-15; DC-13
Rated insulation voltage Ui
250 VAC
Rated impulse withstand voltage Uimp
2.5 kV
Display
green LED: ready for operation,
orange LED: signalling of switching state
Telegram rate
max. 12000 telegrams with repetitions/h; SW922: max. 1440 telegrams/h
Degree of pollution
2
Ambient temperature
0 °C … +55 °C or –20 °C … +55 °C (depending on the variant)
Storage and shipping temperature
–25 °C … +85 °C
Note
Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Switching contacts are not suitable for capacitive loads.
Allows configuration of LBT and status signal of the transmitters
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
Approvals
d
Downloads
Other interesting products
Alternative wireless receiver with 4 potential-free relay outputs (4 change-over contacts)
