Wireless universal transmitter
RF 96 ST Vcc extern
Thermoplastic enclosure
Mounting details to EN 50047
sWave® wireless technology
External power supply via M12 plug-in connector
Can be combined with 3-wire PNP sensors 24 VDC or external sensors or NO contacts with gold contacts
Power supply: 24 VDC
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
Loading...
Found 2 results
Product
Product
Loaded 2 from 2 results
Technical data
General technical data
- Applied standards
- EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 301 489-3, EN 300 220-2
- Enclosure
- thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
- Tightening torque
- M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
- Degree of protection
- IP67 (IEC/EN 60529), only with plugged cable
- Voltage source
- 24 VDC
- Connection
- plug-in connector M12 x 1, 4-pole, A-coded
- Ambient temperature
- –20 °C … +65 °C
- Switching frequency
- max. 5 Hz
- Rated operating voltage range UB
- 10 … 30 VDC Pin 1 and Pin 3 plug-in connector M12
- Rated insulation voltage Ui
- 75 VDC
- Rated impulse withstand voltage Uimp
- 0.5 kV
- Rated operating current Ie
- 2.5 mA
- Standby current
- 15 µA (if sensor is not connected)
- Voltage drop Ue - Uout
- 1.5 V
- Load current
- max. 100 mA
- Switching points
- > 5 VDC (E1, E2)
- Wireless range
- max. 450 m outdoors, max. 40 m indoors
- Actuating time
- min. 80 ms
- Note
- status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Go to our different wireless receivers to find corresponding how-to videos.
- Wireless approvals
- Europe: RED 2014/53/EU
USA: FCC - VPYLBAA0QB1SJ
Canada: IC - 772C-LBAA0QB1SJ
Brazil: on request
Japan: on request
