Inductive sensor

IS M8


  • Stainless steel enclosure

  • M8 x 1 thread

  • Flush mounting

  • Long life, no mechanical wear

  • Suitable for the food processing industry

  • Insensitive to soiling

  • With LED

  • With pre-wired cable or plug-in connector

Technical data

Applied standards
EN 60947-5-2
Enclosure
stainless steel 1.4305
Front cap
POM
Degree of protection
IP67 (IEC/EN 60529)
Connection
cable PVC (Ø max. 3.6 mm), 3 x 0.14 mm² or plug-in connector M8 x 1
Switching elements
1 NO contact, PNP, 3-wire
Rated switching distance sn
2 mm
Correction factors
Steel (S235JR) = 1; Stainless steel approx. 0.7; Brass approx. 0.5; Aluminium approx. 0.5; Copper approx. 0.4
Rated operating voltage range UB
6 … 30 VDC
Residual ripple
≤ 10 %
Switching current
max. 0.2 A
Voltage drop at Ie
max. 1.8 V
Current absorption
< 12 mA at 24 VDC
Hysteresis
approx. 10 %
Switching frequency
2000 Hz
Repeatability
≤ 3 %
Protection circuit
Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
LED display
lights up yellow on actuation
Ambient temperature
–25 °C … +85 °C

Downloads

EU Declaration of Conformity – IS M8 / IS M12 / IS M18 / IS M30

German, English

PDF 962 KB 13.11.2025
Please go to the relevant product pages for additional downloads.

Other interesting products

RF IS M8 FL

Wireless version

Wireless

Ex IS M8

Alternative version with explosion protection

Ex

IS M8 Extreme

Temperature resistant version with higher degree of protection