Wireless universal transmitter
RF 96 BU
Thermoplastic enclosure
Mounting details to EN 50047
Socket M8
sWave® wireless technology (SW868/SW915/SW917/SW922)
No wiring and cable laying required
Power supply by Lithium battery
Easy programming of receiver
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
The RF 96 BU may be used in combination with wireless inductive sensor RF IS M… FL.
Technical data
General technical data
Applied standards
EN IEC 60947-5-1, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP67 (IEC/EN 60529), only with plugged cable
Voltage source
lithium battery (replaceable)
Connection
socket M8 x 1, 4-pole
Connectable devices
RF IS M* FL
Ambient temperature
–20 °C … +65 °C
Switching frequency
max. 5 Hz
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Actuating time
min. 80 ms
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC-Id. XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
