Wireless universal transmitter

RF I/O SW868-4E-BU-2,2Ah LBT

Article no.: 1415410

Standard version
contact us

Product features

newWireless
  • Thermoplastic enclosure

  • 4 x Socket M8

  • sWave® wireless technology

  • No wiring and cable laying required

  • Power supply by Lithium battery

  • Output signal can be individually configured at the receiver

  • LBT - Listen before Talk Firmware

Notes

  • The RF I/O BU may be used in combination with wireless inductive sensor RF IS FL or wireless magnetic sensor RF RC M8 / RF RC M10.

  • Connection of external switching contact (potentialfree contact) with gold contacts possible.

  • The battery is included in delivery.

Technical data

Applied standards
EN IEC 60947-5-1, EN 301 489-3, EN IEC 61000-6-2, EN IEC 61000-6-3, EN IEC 63000
Enclosure
ABS, UL 94 HB, RAL 9005
Antenna
internal antenna
Tightening torque
enclosure mounting screws: max. 1.5 Nm
cover screws: max. 1.5 Nm
Degree of protection
IP65 (IEC/EN 60529), only with plugged cables and/or with closed protective caps
Safety class
III
Ambient temperature
–20 °C … +80 °C
Type of installation
mount on an even surface
Mounting position
any
Mounting
screw connection
Connection
4 x socket M8 x 1, 4-pole
Switching thresholds
max. switch-on threshold: 2.05 V,
min. switch-off threshold: 0.95 V
Switch-on delay ton
max. 0.94 ms
Switch-off delay toff
max. 94.7 ms
Actuating time
min. 80 ms
Telegram rate
max. 12000 telegrams with repetitions/h
Switching frequency
max. 5 Hz
Standby current
60 µA
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Go to our different wireless receivers to find corresponding how-to videos.
Wireless approvals
Europe: RED 2014/53/EU
Frequency
868.3 MHz (Europe)
Data rate
66 kbps
Channel bandwidth
350 kHz
Modulation type
2-FSK
Protocol
sWave®
Transmission power
< 25 mW
Wireless range
max. 450 m outdoors, max. 40 m indoors
Voltage source
lithium battery Tadiran SL-760 (AA), replaceable
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
2.2 Ah
Battery life
depending on operation cycles and number and type of sensors for 1,000 transfers/day and one inductive sensor FL approx. 1,900 days; for 1,000 transfers/day and one mechanical switch about 10 years
Inductive sensor FL 1 x
10 s: approx. 3.9 years; 100 s: approx. 5.1 years; 1,000 s: approx. 5.1 years
Inductive sensor FL 4 x
10 s: approx. 1.7 years; 100 s: approx. 1.9 years; 1,000 s: approx. 1.9 years
Battery life – external contact / magnetic sensor 1 x
mainly activated
10 s: approx. 6.9 years; 100 s: >10 years
mainly inactivated
10 s: approx. 7.9 years; 100 s: >10 years
Battery life – external contact / magnetic sensor 4 x
mainly activated
10 s: approx. 5.2 years; 100 s: approx. 7.4 years; 1,000 s: >10 years
mainly inactivated
10 s: ca. 7,9 years: 100 s: >10 years

Dimensional drawing

Further drawings

Pin assignment

NC = not connected

Downloads

Loading...
Choose the type of download
Mounting and wiring instructions – RF I/O

German, English, French, Italian, Portuguese

PDF2 MB 19.03.2026
Loading...

Other interesting products

Suitable inductive sensor

Wireless

Suitable inductive sensor

Wireless

Suitable inductive sensor

Wireless

Suitable inductive sensor

Wireless

Suitable magnetic sensor

Wireless

Suitable magnetic sensor

Wireless

Wireless universal transmitter

RF I/O SW868-4E-BU-2,2Ah LBT

Article no.: 1415410

Standard version
contact us