Wireless universal transmitter
RF 96 BU SW922 LBT
Article no.: on request
Product features
Thermoplastic enclosure
Mounting details to EN 50047
Socket M8
sWave® wireless technology
No wiring and cable laying required
Power supply by Lithium battery
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
Notes
The RF 96 BU may be used in combination with wireless inductive sensor RF IS M… FL.
Technical data
General technical data
Applied standards
EN IEC 60947-5-1, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 301 489-3, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP67 (IEC/EN 60529), only with plugged cable
Connection
socket M8 x 1, 4-pole
Connectable devices
RF IS M* FL
Ambient temperature
–20 °C … +65 °C
Switching frequency
max. 5 Hz
Standby current
15 µA
Actuating time
min. 80 ms
Note
transmission of battery voltage and switching condition
Wireless technology
General
Frequency
916.5 MHz (Japan)
Data rate
66 kbps
Channel bandwidth
520 kHz
Modulation type
2-FSK
Protocol
sWave®
Wireless approvals
Japan: ? ARIB STD-T108: 204-610002
Function
Telegram rate
max. 1440 telegrams with repetitions/h
Transmission power
< 1 mW
Wireless range
max. 150 m outdoors, max. 20 m indoors
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
Voltage supply
Voltage source
lithium battery Tadiran SL-2770 (C), replaceable
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
8.5 Ah
Battery life
depending on the switching frequency
10 s: >10 years
100 s: >10 years
1000 s: >10 years
Dimensional drawing
Further drawings
NC = not connected
Downloads
Other interesting products
Wireless universal transmitter
RF 96 BU SW922 LBTArticle no.: on request
