Position switch with safety function
EM 98 H-12
Article no.: 1190319Old article no.: 9106130001
Product features
Metal enclosure with wiring compartment
Design to EN 50041
Actuator: Roller lever H
Actuation parallel to switch from right
Wear-resistant plastic roller
Actuator can be repositioned by 4 x 90°
Notes
Actuation from the left should be avoided since this reduces the mechanical life of the position switch.
Technical data
General technical data
- Applied standards
- EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
- Enclosure
- aluminium die-cast, powder-coated
- Switch type
- type 1
- Coding level
- no coding
- Degree of protection
- IP67 (IEC/EN 60529)
- B10d (10 % load)
- 2 million
- TM
- max. 20 years
- Contact material
- silver
- Switching system
- snap action, positive break NC contacts A
- Switching elements
- 2 NC/1 NO contact, type Zb
- Connection
- screw connection terminals
- Cable cross-section
- max. 1.5 mm² (incl. conductor ferrules)
- Cable entry
- 1 x M20 x 1.5 (for cable glands only)
- Rated impulse withstand voltage Uimp
- 4 kV
- Rated insulation voltage Ui
- 400 V
- Conventional thermal current Ithe
- 1.5 A
- Rated operating current/voltage Ie/Ue
- 1.5 A/230 VAC; 0.27 A/250 VDC
- Utilisation category
- AC-15; DC-13
- Short-circuit protection
- 1.5 A gG fuse
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with an actuating angle of 30°
- Operation cycles
- max. 1800/h
- Ambient temperature
- –20 °C … +90 °C
- Approvals
- da
- Weight
- 180 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
T Positive break travel/angle
Downloads
Loading...
Other interesting products
Position switch with safety function
EM 98 H-12Article no.: 1190319Old article no.: 9106130001
