Wireless optical sensor

RF 96 LT


  • sWave® wireless technology

  • Light sensor: registration by light reflection

  • Simple mounting

  • Low switching frequency < 1 Hz

  • Switching distances: 40 mm up to 170 mm (dependent on object colour and material)

  • Power supply by Lithium battery (replaceable)

  • Easy programming of receiver

  • LBT - Listen before Talk Firmware

Technical data

Applied standards
EN 60947-5-2, EN 61000-6-2, EN 61000-6-3, EN 301 489-3, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP54 (IEC/EN 60529)
Voltage source
lithium battery (replaceable)
Sensor
IR reflective light sensor
Ambient temperature
0 °C … +65 °C
Telegram rate
max. 12000 telegrams with repetitions/h; SW922: max. 1440 telegrams/h
Switching frequency
max. 1 Hz
Switching distances
white paper: 170 mm
grey card 18% reflection: 90 mm
storage box blue: 90 mm
storage box red: 120 mm
storage box black: 40 mm
Standby current
130 µA sensor not actuated,
250 µA sensor actuated
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Go to our different wireless receivers to find corresponding how-to videos.
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC-Id. XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002

Downloads

Mounting and wiring instructions – RF 96 LT

German, English, French, Italian, Portuguese

PDF 2 MB 13.11.2025
Please go to the relevant product pages for additional downloads.