Wireless pull-wire switch
RF 97 WHK/90° SW915B
Article no.: on request
Product features
Thermoplastic enclosure
Design to EN 50047
sWave® wireless technology
Output signal can be individually configured at the receiver
Power supply by Lithium battery (replaceable)
LBT - Listen before Talk Firmware
Actuator: Offset roller lever with collar WHK
Including 3.2 m long pull-wire and ball
Available soon
Notes
The rope is attached to the lever by a clip which releases the rope if overloaded.
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 301 489-3, EN 300 220-2, EN IEC 63000, EN IEC 62368-1
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0, weathering resistant, UV stabilised
Degree of protection
IP67 (IEC/EN 60529)
Safety class
III
Ambient temperature
–25 °C … +70 °C
Operation cycles
max. 1800/h
Standby current
3 µA
Mechanical life
250 000 operations
Wireless technology
General
Frequency
914.2 MHz (USA, Canada)
Data rate
62.5 kbps
Channel bandwidth
500 kHz
Modulation type
CSS
Protocol
sWave®
Wireless approvals
USA: FCC - VPYLBAA0QB1SJ
Canada: IC - 772C-LBAA0QB1SJ
Function
Telegram rate
max. 12000 telegrams with repetitions/h
Transmission power
< 25 mW
Wireless range
max. 450 m outdoors, max. 40 m indoors
Collision avoidance procedure
LBT - Listen before Talk software
Note
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
status signal – can be individually configured via radio receiver (delivery state: without status signal)
Go to our different wireless receivers to find corresponding how-to videos.
Voltage supply
Voltage source
lithium battery (replaceable)
Battery life
> 10 years
Dimensional drawing
Downloads
Wireless pull-wire switch
RF 97 WHK/90° SW915BArticle no.: on request
