Wireless receiver
RF Rx SW917NG-4S 24VDC
Article no.: 1455669
Product features
sWave® wireless technology
4 potential-free relay outputs
4 NO contacts, max. 3 A
Transmitter/receiver assignment by teaching mode
LEDs for indication of switching state
SMA reverse plug-in connector for external antenna
Notes
External antenna always required for optimum wireless range.
This is available for sale within Australia/NZ only through our partner NHP Electrical engineering Products Pty. Ltd.
Technical data
General technical data
- Applied standards
- IEC 60947-5-1, CISPR 32:2015 + AMD1:2019; ARPANSA S-1:2021; AS/NZS 2772.2:2016 + AMD1:2018; ACMA Radiocommunications Equipment (General) Rules 2021; NZ RSM General User Radio Licence – Special Condition 23
- Enclosure
- polyamide, self-extinguishing UL 94 V-0, RAL 7035
- Degree of protection
- IP20 (IEC/EN 60529)
- Number of channels
- 4
- Mounting
- DIN rail mounting
- Connection
- screw connection terminals 0.14 mm² - 2,5 mm², stripping length 8 mm
- Safety class
- II
- Teachable transmitters
- 40
- Outputs
- 4 NO contacts (relay)
- Rated operating current/voltage Ie/Ue
- max. 0.1 A/24 VDC -15 % … +10 %;
output contacts: 3 A/250 VAC; 3 A/24 VDC
- Utilisation category
- outputs: AC-15 (at 10 % Ie); DC-13
- Rated insulation voltage Ui
- 250 VAC
- Rated impulse withstand voltage Uimp
- 2.5 kV
- Display
- green LED: ready for operation,
orange LED: signalling of switching state
- Mechanical life
- > 5x106 operations
- Electrical life
- > 1x105 operations AC1
- Shock resistance
- 1 g
- Vibration resistance
- 2 g (10-55 Hz)
- Degree of pollution
- 2
- Ambient temperature
- –20 °C … +55 °C
- Storage and shipping temperature
- –25 °C … +85 °C
- Note
- Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
Switching contacts are not suitable for capacitive loads.
Allows configuration of LBT and status signal of the transmitters
Wireless technology
- Frequency
- 917.0 MHz (Australia)
- Channel bandwidth
- 550 kHz
- Protocol
- sWave®
- Wireless approvals
- Australia: |
Dimensional drawing
Further drawings
Arrangement of receiver and switch antenna
A = Optimum mounting
B = Possible mounting
C = Unsuitable mounting
Downloads
Loading...
Other interesting products
Alternative wireless receiver with 4 potential-free relay outputs (4 change-over contacts)
Wireless receiver
RF Rx SW917NG-4S 24VDCArticle no.: 1455669
