Product features
sWave® wireless technology
Communication via UDP or TCP/IP (Server or Client - Mode)
Webserver based Setup
Including Modbus/TCP interface
Transmitter/receiver assignment by teaching mode
LEDs for indication of operating state
SMA plug-in connector for external antenna
Notes
External antenna always required for optimum wireless range.
Technical data
General technical data
- Applied standards
- EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-3, EN 300 220-2
- Degree of protection
- IP20 (IEC/EN 60529)
- Mounting
- DIN rail mounting
- Connection
- terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
- Network interface
- 10/100 Base-T Ethernet (Auto detection) via RJ 45
- Software interface
- TCP (Client, Server) / UDP / IP (DHCP) / ModbusTCP
- Rated operating current/voltage Ie/Ue
- max. 0.2 A/12 VDC - 15 % ... 24VDC + 10 %
- Display
- green LED: Reset state
orange LED: signalisation of telegram
- Degree of pollution
- 2
- Ambient temperature
- 0 °C … +55 °C
- Storage and shipping temperature
- –25 °C … +85 °C
- Wireless approvals
- Europe: RED 2014/53/EU
- Wireless range
- max. 450 m outdoors, max. 40 m indoors
- Note
- Allows configuration of LBT and status signal of the transmitters
Wireless technology
- Frequency
- 868.3 MHz (Europe)
- Data rate
- 66 kbps
- Channel bandwidth
- 350 kHz
- Modulation type
- 2-FSK
- Protocol
- sWave®
- Transmission power
- < 25 mW
Dimensional drawing
Further drawings
Arrangement of receiver and switch antenna
A = Optimum mounting
B = Possible mounting
C = Unsuitable mounting
Downloads
Loading...
