RF I/O SW915B-4E-Vcc-ext LBT

Applied standards

EN 60947-5-1, EN 61000-6-3, EN 300 220-2, EN 301 489-3, EN 62479

Enclosure

ABS, UL 94 HB, RAL 9005

Antenna

internal antenna

Tightening torque

enclosure mounting screws: max. 1.5 Nm
cover screws: max. 1.5 Nm

Degree of protection

IP65 (IEC/EN 60529), only with plugged cables and/or with closed protective caps

Voltage source

24 VDC

Connection

Sensors: plug-in connector 4 x M12 x 1, 4-pole
power supply: 1 x M12 socket

Connectable devices

IS M8, IS M12, IS M18, IS M30, external switches using the connecting cable

Safety class

III

Ambient temperature

–20 °C … +65 °C

Type of installation

mount on an even surface

Mounting position

any

Mounting

screw connection

Switching frequency

max. 5 Hz

Rated operating voltage range U_B

18 … 30 VDC Pin 1 and Pin 3, socket M12

Rated insulation voltage U_i

75 VDC

Rated impulse withstand voltage U_imp

0.5 kV

Rated operating current I_e

2.5 mA

Voltage drop U_e - U_out

3.5 V with 4 x 50 mA sensor current

Load current

max. 50 mA per sensor connection (not short-circuit proof)

Switching points

> 5 VDC (E1 - E4)

Actuating time

min. 80 ms

Note

transmission of battery voltage and switching condition

General

Frequency

914.2 MHz (USA, Canada) 

Data rate

62.5 kbps

Channel bandwidth

500 kHz

Modulation type

CSS

Protocol

sWave®

Wireless approvals

USA: FCC - VPYLBAA0QB1SJ
Canada: IC - 772C-LBAA0QB1SJ

Function

Telegram rate

max. 12000 telegrams with repetitions/h

Transmission power

< 25 mW

Wireless range

max. 450 m outdoors, max. 40 m indoors

Collision avoidance procedure

LBT - Listen before Talk software

Note

LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
status signal – can be individually configured via radio receiver (delivery state: without status signal)
Go to our different wireless receivers to find corresponding how-to videos.