Product features
Thermoplastic enclosure
sWave® wireless technology
Can be combined with 3-wire PNP sensors 24 VDC or external sensors or NO contacts with gold contacts
No wiring and cable laying required
External power supply via M12 socket
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
Technical data
General technical data
- Applied standards
- EN 60947-5-1, EN 61000-6-3, EN 300 220-2, EN 301 489-3, EN 62479
- Enclosure
- ABS, UL 94 HB, RAL 9005
- Antenna
- internal antenna
- Tightening torque
- enclosure mounting screws: max. 1.5 Nm
cover screws: max. 1.5 Nm
- Degree of protection
- IP65 (IEC/EN 60529), only with plugged cables and/or with closed protective caps
- Voltage source
- 24 VDC
- Connection
- Sensors: plug-in connector 4 x M12 x 1, 4-pole
power supply: 1 x M12 socket
- Connectable devices
- IS M8, IS M12, IS M18, IS M30, external switches using the connecting cable
- Safety class
- III
- Ambient temperature
- –20 °C … +65 °C
- Type of installation
- mount on an even surface
- Mounting position
- any
- Mounting
- screw connection
- Telegram rate
- max. 12000 telegrams with repetitions/h
- Switching frequency
- max. 5 Hz
- Rated operating voltage range UB
- 18 … 30 VDC Pin 1 and Pin 3, socket M12
- Rated insulation voltage Ui
- 75 VDC
- Rated impulse withstand voltage Uimp
- 0.5 kV
- Rated operating current Ie
- 2.5 mA
- Voltage drop Ue - Uout
- 3.5 V with 4 x 50 mA sensor current
- Load current
- max. 50 mA per sensor connection (not short-circuit proof)
- Switching points
- > 5 VDC (E1 - E4)
- Actuating time
- min. 80 ms
- Note
- status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Wrong polarity protection
Go to our different wireless receivers to find corresponding how-to videos.
- Wireless approvals
- Europe: RED 2014/53/EU
- Weight
- 170 g
Wireless technology
- Frequency
- 868.3 MHz (Europe)
- Data rate
- 66 kbps
- Channel bandwidth
- 350 kHz
- Modulation type
- 2-FSK
- Protocol
- sWave®
- Transmission power
- < 25 mW
- Wireless range
- max. 450 m outdoors, max. 40 m indoors
Dimensional drawing
Further drawings
External switch contact
Pin assignment
Colour coding only valid for
coupling 4-poles mat. no. 1215497 and
coupling 4-poles mat. no. 1262873
Pin assignment / Power supply
Downloads
Loading...
