Product features
Cold-resistant down to -40 °C
High degree of protection IP66
Metal enclosure
Design to EN 50041
Actuator: Parallel roller lever PH
Actuation parallel to switch from below
Wear-resistant plastic roller
Actuator can be repositioned by 4 x 90°
Notes
Actuation from the left should be avoided since this reduces the mechanical life of the position switch.
Technical data
General technical data
- Applied standards
- EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
- Enclosure
- aluminium die-cast, corrosion-resistant, powder-coated, anthracite grey, similar to RAL 7016
- Cover
- stainless steel 1.4401, powder-coated, signal yellow, similar to RAL 1003
- Switch type
- type 1
- Coding level
- no coding
- Degree of protection
- IP66/IP67 (IEC/EN 60529)
- B10d (10 % load)
- 2 million
- TM
- max. 20 years
- Contact material
- silver
- Switching system
- slow action, positive break NC contacts A
- Switching elements
- 1 NC/1 NO contact, type Zb
- Connection
- screw connection terminals
- Cable cross-section
- max. 2.5 mm² (incl. conductor ferrules)
- Cable entry
- 1 x M20 x 1.5 (for cable glands only)
- Rated impulse withstand voltage Uimp
- 4 kV
- Rated insulation voltage Ui
- 400 V
- Conventional thermal current Ithe
- 6 A
- Rated operating current/voltage Ie/Ue
- 6 A/250 VAC; 0.25 A/230 VDC; 3 A/24 VDC; 5 A/5 VDC
- Utilisation category
- AC-15; DC-13
- Short-circuit protection
- 6 A gG fuse
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with an actuating angle of 30°
- Operation cycles
- max. 1800/h
- Ambient temperature
- –40 °C … +60 °C
- Approvals
- da<
- Weight
- 276 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
T Positive break travel/angle
