Wireless laser sensor
RF 96 SDS
sWave® wireless technology (SW868/SW915/SW917/SW922)
Time of flight sensor
Power supply by Lithium battery (replaceable)
Easy programming of receiver
LBT - Listen before Talk software (necessary in conjunction with potential interference)
Technical data
General technical data
Applied standards
EN IEC 60947-5-2, EN 55011, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP54 (IEC/EN 60529)
Sensor
logging with IR laser
Laser class
Class 1 to EN 60825-1; 950 nm
Ambient temperature
0 °C … +65 °C
Telegram rate
max. 7200 telegrams with repetitions/h; SW922: max. 1440 telegrams/h
Switching frequency
0.33 Hz
Cycle time
3 s
Switching distances
25 cm
Accuracy
± 20 mm
Field of view
27°
Hysteresis
one side, default 4 cm
Standby current
200 µA
Wireless range
SW868/915/917:
max. 450 m outdoors,
max. 40 m indoors
SW922:
max. 150 m outdoors,
max. 20 m indoors
Actuating time
min. 20 ms
Note
status signal adjustable via jumper, no, 10 s, 100 s, 1000 s, 10000 s
delivery state: jumper position without status signal
transmission of battery voltage and switching condition
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-RFRXSW915
Canada: IC - 5158A-RFRXSW915
Mexico: IFT - RCPSTRF17-1886
Brazil: ANATEL 04172-18-06718
Japan: ? ARIB STD-T108: 204-610002
Note
Below the sensor window a red LED indicates the battery status. It will light up for 1 second after transmission if the battery voltage is low. In this case assume that the battery is empty and needs to be changed.
