Emergency pull-wire switch
ZS 75 2Ö/2S WVD / 120-180 N -40°C Extreme
Article no.: 1189292Old article no.: 75442925
Product features
Cold-resistant down to -40 °C
Metal enclosure
Wire length up to 130 m
Adjustable spring force: 120-180 N
Release by push button (VD)
Watertight collar W for protection against penetration of dirt
Wire pull and breakage detection
Attention: Please state required international approvals with your order!
Technical data
General technical data
- Applied standards
- EN 60947-5-1, EN 60947-5-5, EN ISO 13850, EN ISO 13849-1
- Enclosure
- aluminium die-cast, powder-coated
- Cover
- aluminium die-cast, powder-coated
- Degree of protection
- IP65 (IEC/EN 60529)
- B10d (10 % load)
- 100 000
- TM
- max. 20 years
- Contact material
- silver
- Switching elements
- 2 NC/2 NO contacts, type Zb
- Switching system
- snap action, positive break NC contacts A
- Connection
- screw connection terminals
- Cable cross-section
- min. 0.5 mm², max. 2.5 mm² (incl. conductor ferrules)
- Stripping length
- 6 mm
- Cable entry
- 2 x M25 x 1.5
- Rated impulse withstand voltage Uimp
- 6 kV
- Rated insulation voltage Ui
- 400 V
- Conventional thermal current Ithe
- 6 A
- Utilisation category
- AC-15
- Rated operating current/voltage Ie/Ue
- 6 A/400 VAC
- Short-circuit protection
- 6 A gG/gN fuse
- Ambient temperature
- –40 °C … +70 °C
- Mechanical life
- > 100 000 operations
- Max. wire length
- 130 m
- Note
- At 5 m distance intermediate wire supports are required. One wire thimble is provided.
- Approvals
- ßda
- Weight
- 980 g
Dimensional drawing
Further drawings
Switching diagram
U Latching point
V Wire breakage detection
W Wire pull detection
Contact diagram
Downloads
Loading...
Other interesting products
Emergency pull-wire switch
ZS 75 2Ö/2S WVD / 120-180 N -40°C ExtremeArticle no.: 1189292Old article no.: 75442925
