Emergency pull-wire switch
ZS 73 S 1Ö/1S VD
Article no.: 1053107 Old article no.: 73130501
contact usProduct features
Metal enclosure
2 contacts
Wire length up to 2 x 100 m
Release by push button (VD)
Wire pull and breakage detection
Notes
At 4 m distance intermediate wire supports are required. Two compensation springs type ZS 73/75 S must be installed, see accessories.
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 60947-5-5, EN ISO 13850, EN ISO 13849-1
Enclosure
aluminium die-cast, enamel finish
Cover
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Degree of protection
IP65 (IEC/EN 60529)
B10d (10 % load)
100 000
TM
max. 20 years
Contact material
silver
Switching elements
1 NC/1 NO contact, type Zb
Switching system
snap action, positive break NC contacts A
Connection
screw connection terminals
Cable cross-section
min. 0.5 mm², max. 2.5 mm² (incl. conductor ferrules)
Stripping length
6 mm
Cable entry
2 x M20 x 1.5
Rated impulse withstand voltage Uimp
6 kV
Rated insulation voltage Ui
400 V
Conventional thermal current Ithe
6 A
Utilisation category
AC-15
Rated operating current/voltage Ie/Ue
6 A/400 VAC
Short-circuit protection
6 A gG/gN fuse
Ambient temperature
–25 °C … +70 °C
Mechanical life
> 100 000 operations
Max. wire length
2 x 100 m
Approvals
ß d ]
Weight
750 g
Downloads
Variants / Options
Other interesting products
Emergency pull-wire switch
ZS 73 S 1Ö/1S VDArticle no.: 1053107 Old article no.: 73130501
contact us