Product features
sWave® wireless technology
LEDs for indication of operating state
1-level repeater: for the signal gain between transmitter and receiver
SMA plug-in connector for external antenna
Notes
External antenna always required for optimum wireless range.
Technical data
General technical data
- Applied standards
- EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 60068-2-6, EN 60068-2-27, EN 301 489-3, EN 300 220-2
- Enclosure
- polycarbonate, self-extinguishing UL 94 V-2, RAL 7035
- Degree of protection
- IP20 (IEC/EN 60529)
- Mounting
- DIN rail mounting
- Connection
- terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
- Rated operating current/voltage Ie/Ue
- max. 0.02 A/24 VDC -15 % … +10 %; max. 0.03 A/24 VAC -15 % … +10 %
- Utilisation category
- AC-15; DC-13
- Rated insulation voltage Ui
- 250 VAC
- Rated impulse withstand voltage Uimp
- 2.5 kV
- Display
- green LED: ready for operation
orange LED: signalisation of telegram
- Degree of pollution
- 2
- Ambient temperature
- 0 °C … +55 °C
- Telegram rate
- max. 12000 telegrams with repetitions/h
- Storage and shipping temperature
- –25 °C … +85 °C
- Wireless approvals
- Europe: RED 2014/53/EU
- Wireless range
- max. 450 m outdoors, max. 40 m indoors
- Weight
- 56 g
Wireless technology
- Frequency
- 868.3 MHz (Europe)
- Data rate
- 66 kbps
- Channel bandwidth
- 350 kHz
- Modulation type
- 2-FSK
- Protocol
- sWave®
- Transmission power
- < 25 mW
Dimensional drawing
Further drawings
Arrangement of receiver and switch antenna
A = Optimum mounting
B = Possible mounting
C = Unsuitable mounting
Downloads
Loading...
