Wireless receiver
RF RxT SW2.4-IND 4W-VAL 24 VAC/DC
Article no.: 1187208Old article no.: 90590011
Standard version
contact us
Product features
sWave® wireless technology
4 potential-free relay outputs
4 change-over contacts, max. 6 A
LEDs for indication of switching state
SMA plug-in connector for external antenna
Technical data
General technical data
- Applied standards
- EN 300 440, EN 301 489-17, EN 60947-5-1
- Degree of protection
- IP20 (IEC/EN 60529)
- Mounting
- DIN rail mounting
- Connection
- terminals with CAGE CLAMP WAGO Series 236: 0.08 … 2.5 mm² / AWG 28-12, AWG 12: THHN, THWN, stripping length 5 … 6 mm / 0.22 in
- Inputs
- 2 transmitters per receiver
- Outputs
- 4 change-over contacts (relays)
K4 is used as validate relay
- Rated operating current/voltage Ie/Ue
- max. 0.21 A/24 VDC -15 % … +10 %;
output contacts: 6 A/250 VAC; 2 A/24 VDC
- Utilisation category
- AC-15; DC-13
- Display
- green LED: ready for operation,
orange LED: signalling of switching state
- EMC rating
- according to EMC Directive
- Degree of pollution
- 2
- Ambient temperature
- 0 °C … +55 °C
- Storage and shipping temperature
- –25 °C … +85 °C
- Note
- Inductive loads (contactors, relays etc.) are to be suppressed by suitable circuitry.
- Wireless approvals
- Europe: RED 2014/53/EU
USA: FCC-Id. R7TAMB2524
Canada: IC - 5136A-AMB2524
- Approvals
- d
- Vibration resistance
- NC contact 5 g, NO contact 20 g
- Shock resistance
- max. 100 g
- Weight
- 180 g
Wireless technology
- Frequency
- 2.4 - 2.4835 GHz
- Output power
- - 6 dBm e.i.r.p (0 dBm at 50 Ohm)
- Input sensitivity
- up to -98 dBm (-102 dBm at 50 Ohm)
Dimensional drawing
Further drawings
Arrangement of receiver and switch antenna
A = Optimum mounting
B = Possible mounting
C = Unsuitable mounting
Downloads
Loading...
Wireless receiver
RF RxT SW2.4-IND 4W-VAL 24 VAC/DCArticle no.: 1187208Old article no.: 90590011
Standard version
contact us
