Product features
Thermoplastic enclosure
sWave® wireless technology
No wiring and pipe laying required
Power supply by Lithium battery
Easy programming of receiver
Output signal can be individually configured at the receiver
LBT - Listen before Talk software (necessary in conjunction with potential interference)
Notes
The actuator is not included in the delivery of the switches
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 61000-6-2, EN 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
enclosure mounting screws: 0.5 … 0.6 Nm
Degree of protection
IP67 (IEC/EN 60529)
Ambient temperature
–20 °C … +65 °C
Operation cycles
max. 1440 telegrams with repetitions/h
Switching system
reed contacts
Rated switching distance sn
10 mm
Hysteresis
approx. 1 mm
Mechanical life
> 1 million operations
Actuating time
min. 80 ms
Mounting
actuator: min. 8 mm distance to ferromagnetic material
Note
no status signal available
Wireless approvals
Japan: ? ARIB STD-T108: 204-610002
Weight
29 g
Wireless technology
Protocol
sWave®
Frequency
916.5 MHz (Japan)
Transmission power
< 1 mW
Data rate
66 kbps
Channel bandwidth
520 kHz
Wireless range
max. 150 m outdoors, max. 20 m indoors
Modulation type
2-FSK
Voltage supply
Voltage source
lithium battery CR 2032 (replaceable)
System
Lithium-MnO2
Nominal voltage
3 V
Nominal capacity
0.23 Ah
Battery life
> 800 000 operations
Downloads
