Product features
Thermoplastic enclosure
sWave® wireless technology
No wiring and cable laying required
Plug-in connector M8
Power supply by Lithium battery
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
Notes
Connection of external switching contact (potentialfree contact) with gold contacts possible.
Technical data
General technical data
Applied standards
EN IEC 60947-5-1, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 61000-4-2, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, self-extinguishing UL 94 V-0
Tightening torque
enclosure mounting screws: 0.5 … 0.6 Nm
Degree of protection
IP67 (IEC/EN 60529), only with plugged cable
Connection
Plug-in connector M8 x 1, 3-pole
Mechanical life
> 1 million operations
Telegram rate
max. 1440 telegrams with repetitions/h
Actuating time
min. 80 ms
Ambient temperature
–20 °C … +65 °C
Wireless approvals
Japan: ? ARIB STD-T108: 204-610002
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Go to our different wireless receivers to find corresponding how-to videos.
Wireless technology
Protocol
sWave®
Frequency
916.5 MHz (Japan)
Transmission power
< 1 mW
Data rate
66 kbps
Channel bandwidth
520 kHz
Wireless range
max. 150 m outdoors, max. 20 m indoors
Modulation type
2-FSK
Voltage supply
Voltage source
lithium battery CR 2032 (replaceable)
System
Lithium-MnO2
Nominal voltage
3 V
Nominal capacity
0.23 Ah
Battery life
> 800 000 operations
Downloads
