RF 10 ST SW915B LBT

Applied standards

EN 300 220-2, EN 301 489-3, EN 62479, EN 60947-5-1, EN IEC 61000-6-2, EN 55011, EN 55032, EN IEC 63000

Enclosure

thermoplastic, glass-fibre reinforced, self-extinguishing UL 94 V-0

Tightening torque

enclosure mounting screws: 0.5 … 0.6 Nm

Degree of protection

IP67 (IEC/EN 60529), only with plugged cable

Connection

plug-in connector M8 x 1, 3-pole, A-coded

Safety class

III

Mechanical life

> 1 million operations

Actuating time

min. 80 ms

Switching frequency

max. 5 Hz

Ambient temperature

–20 °C … +65 °C

Type of installation

screw connection

Mounting position

any

Sensor system

digital input

Switching system

external micro switch

Switching elements

NO contact, gold-plated contacts

Note

transmission of battery voltage and switching condition

General

Frequency

914.2 MHz (USA, Canada) 

Data rate

62.5 kbps

Channel bandwidth

500 kHz

Modulation type

CSS

Protocol

sWave®

Transmission power

< 25 mW

Wireless approvals

USA: FCC - VPYLBAA0QB1SJ
Canada: IC - 772C-LBAA0QB1SJ

Function

Wireless range

max. 450 m outdoors, max. 40 m indoors

Collision avoidance procedure

LBT - Listen before Talk software

Note

LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
status signal – can be individually configured via radio receiver (delivery state: without status signal)
Go to our different wireless receivers to find corresponding how-to videos.

Voltage source

lithium battery CR 2032 (replaceable)

System

Lithium-MnO₂

Nominal voltage

3 V

Nominal capacity

0.23 Ah

Battery life

depending on the switching frequency
sensor mainly not activated:
10 s: approx. 1.0 years, 100 s: approx. 4.6 years, 1000 s: approx. 7.6 years
sensor mainly activated:
10 s: approx. 0.8 years, 100 s: approx. 2.6 years, 1000 s: approx. 3.4 years