Position switch
HS 98 R 0-10 VDC IP66 Extreme
Article no.: on request
Product features
With analogue output
High degree of protection IP66 / IP67
Metal enclosure with wiring compartment
Design to EN 50041
Output value: 0 … 10 VDC
Actuator: Roller plunger R
Actuator type C to EN 50041
Actuator can be repositioned by 4 x 90°
Technical data
General technical data
- Applied standards
- EN 60947-5-2, EN 60947-5-7
- Enclosure
- aluminium die-cast, corrosion-resistant, powder-coated, anthracite grey, similar to RAL 7016
- Cover
- stainless steel 1.4401, powder-coated, signal yellow, similar to RAL 1003
- Degree of protection
- IP66/IP67 (IEC/EN 60529)
- Switching system
- Hall sensor with analogue output
- Linearity
- 2 %
- Connection
- Cage clamps
- Cable cross-section
- max. 0.08 … 2.5 mm², AWG 28 … 12
- Cable entry
- 1 x M20 x 1.5
- Over temperature protection
- monitoring via μ controller + NTC
- Rated operating voltage Ue
- 24 VDC
- Rated operating voltage range UB
- 18 … 30 VDC
- Rated operating current Ie
- ≤ 25 mA
- Rated output voltage
- Q1: 0 … 10 V; max. 10.2 V
- Rated output current
- Q2: ≤ 100 mA short-circuit protected
- Voltage drop at Ie
- 2 V
- Working resistance
- ≥ 1 kΩ
- Attendance delay tv
- < 500 ms
- Short-circuit protection
- internal fuse 0.375 A F
- Ambient temperature
- –20 °C … +60 °C
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.25 m/s with a vertical actuating angle of 30°
Dimensional drawing
Further drawings
Contact diagram
Contacts
Output signal
Example "Setting of output"
Downloads
Variants / Options
Position switch
HS 98 R 0-10 VDC IP66 ExtremeArticle no.: on request
