Position switch with safety function
ES 41 R 2Ö-STECK -30°C Extreme
Article no.: 1053506Old article no.: 41509002
Product features
Metal enclosure
2 NC contacts
Cold-resistant down to -30 °C
Locking screws, brass nickel-plated
Actuator: Roller plunger R
Actuator can be repositioned by 4 x 90°
Technical data
General technical data
- Applied standards
- EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
- Enclosure
- aluminium die-cast, powder-coated, RAL 7016
- Cover
- steel, powder-coated, RAL 1003
- Switch type
- type 1
- Coding level
- no coding
- Degree of protection
- IP65 (IEC/EN 60529), only with plugged cable
- B10d (10 % load)
- 2 million
- TM
- max. 20 years
- Contact material
- silver
- Switching system
- slow action, positive break NC contacts A
- Switching elements
- 2 NC contacts, type Zb
- Connection
- plug-in-connector M12 x 1, 4-poles
- Rated impulse withstand voltage Uimp
- 2.5 kV
- Rated insulation voltage Ui
- 400 V
- Conventional thermal current Ithe
- 6 A
- Utilisation category
- AC-15
- Rated operating current/voltage Ie/Ue
- 4 A/50 VAC
- Short-circuit protection
- 6 A gG fuse
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with a vertical actuating angle of 30°
- Operation cycles
- max. 1800/h
- Ambient temperature
- –30 °C … +80 °C
- Repeat accuracy of switching points
- ± 0.1 mm
- Approvals
- a
- Weight
- 160 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
T Positive break travel/angle
Pin assignment
Downloads
Variants / Options
The following variants / options are available on request:
Plug-in connector M12 x 1, 4-pole
Position switch with safety function
ES 41 R 2Ö-STECK -30°C ExtremeArticle no.: 1053506Old article no.: 41509002
