Product features
Metal enclosure
Snap action, change-over contact with single break
Suitable for in-line mounting
With pre-wired cable
Actuator: Roller lever with collar WH
Metal roller
Watertight collar for protection against penetration of dirt
Notes
Actuation from the left should be avoided since this reduces the mechanical life of the position switch.
Technical data
General technical data
- Applied standards
- EN 60947-5-1
- Enclosure
- aluminium die-cast, powder-coated
- Degree of protection
- IP67 (IEC/EN 60529)
- Contact material
- silver
- Switching elements
- 1 change-over contact with single break, type C
- Switching system
- snap action
- Connection
- cable H05VV-F
- Cable cross-section
- 4 x 0.75 mm²
- Cable length
- 5 m
- Rated impulse withstand voltage Uimp
- 4 kV
- Rated insulation voltage Ui
- 250 V
- Conventional thermal current Ithe
- 5 A
- Utilisation category
- AC-15; DC-13
- Rated operating current/voltage Ie/Ue
- 5 A/250 VAC; 0.16 A/230 VDC
- Short-circuit protection
- 5 A gG fuse
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with a vertical actuating angle of α = 40° and β = 25°
- Operation cycles
- max. 1800/h
- Ambient temperature
- –20 °C … +75 °C
- Degree of pollution
- 3
- Approvals
- a
- Weight
- 480 g
Dimensional drawing
Further drawings
Switching diagram
Contact diagram
Actuating angles
α - Actuating angle from right of switch axis
β - Actuating angle from left of switch axis as shown in picture
Downloads
Variants / Options
The following variants / options are available on request:
Actuator turned by 180°
Plastic roller
Gold-plated contacts
Cable entry on side
Plug-in connector M12 x 1, 5-pole
Plug-in connector M12 x 1, 4-pole
Mounting thread M16 x 1.5
