Product features
Metal enclosure
Snap action, change-over contact with single break
Suitable for in-line mounting
With pre-wired cable
Actuator: Roller lever with collar WH
Metal roller
Watertight collar for protection against penetration of dirt
Notes
Actuation from the left should be avoided since this reduces the mechanical life of the position switch.
Technical data
General technical data
Applied standards
EN 60947-5-1
Enclosure
aluminium die-cast, powder-coated
Degree of protection
IP67 (IEC/EN 60529)
Contact material
silver
Switching elements
1 change-over contact with single break, type C
Switching system
snap action
Connection
cable H05VV-F
Cable cross-section
4 x 0.75 mm²
Cable length
2 m
Rated impulse withstand voltage Uimp
4 kV
Rated insulation voltage Ui
250 V
Conventional thermal current Ithe
5 A
Utilisation category
AC-15; DC-13
Rated operating current/voltage Ie/Ue
5 A/250 VAC; 0.16 A/230 VDC
Short-circuit protection
5 A gG/gN fuse
Mechanical life
> 1 million operations
Actuating speed
max. 0.5 m/s with a vertical actuating angle of α = 40° and β = 25°
Operation cycles
max. 1800/h
Ambient temperature
–20 °C … +75 °C
Approvals
a
Weight
250 g
Dimensions
Drawings
α - Actuating angle from right of switch axis
β - Actuating angle from left of switch axis as shown in picture
Downloads
Variants / Options
The following variants / options are available on request:
Actuator turned by 180°
Plastic roller
Gold-plated contacts
Cable entry on side
Plug-in connector M12 x 1, 5-pole
Plug-in connector M12 x 1, 4-pole
Mounting thread M16 x 1.5
