Wireless magnetic sensor
RF RC 10
Thermoplastic enclosure
sWave® wireless technology
No wiring and cable laying required
Power supply by Lithium battery
Output signal can be individually configured at the receiver
LBT - Listen before Talk Firmware
Notes
The actuator is not included in the delivery of the switches.
Loading...
Found 2 results
Product
Product
Loaded 2 from 2 results
Technical data
General technical data
- Applied standards
- EN 61000-6-2, EN 301 489-3, EN 300 220-2, EN 62479, EN 55011, EN 55032, EN IEC 63000, EN 60947-5-1
- Enclosure
- thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
- Tightening torque
- enclosure mounting screws: 0.5 … 0.6 Nm
- Degree of protection
- IP67 (IEC/EN 60529)
- Safety class
- III
- Ambient temperature
- –20 °C … +65 °C
- Mounting position
- any
- Switching system
- reed contacts
- Rated switching distance sn
- 10 mm
- Hysteresis
- approx. 1 mm
- Standby current
- < 5 µA
- Telegram rate
- max. 12000 telegrams with repetitions/h
- Wireless range
- max. 450 m outdoors, max. 40 m indoors
- Mechanical life
- > 1 million operations
- Actuating time
- min. 80 ms
- Switching frequency
- max. 5 Hz
- Mounting
- actuator: min. 8 mm distance to ferromagnetic material
- Note
- status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Go to our different wireless receivers to find corresponding how-to videos.
- Wireless approvals
- Europe: RED 2014/53/EU
USA: FCC - VPYLBAA0QB1SJ
Canada: IC - 772C-LBAA0QB1SJ
Brazil: on request
Japan: on request
Voltage supply
- Voltage source
- lithium battery CR 2032 (replaceable)
- System
- Lithium-MnO2
- Nominal voltage
- 3 V
- Nominal capacity
- 0.23 Ah
- Battery life
- depending on the switching frequency
10 s: approx. 1.0 years
100 s: approx. 4.6 years
1,000 s: approx. 7.5 years
Downloads
Loading...
