Inductive sensor

IS M30


  • Metal enclosure

  • M30 x 1.5 thread

  • Flush mounting

  • Long life, no mechanical wear

  • Insensitive to soiling

  • With LED

  • With pre-wired cable or plug-in connector

Technical data

Applied standards
EN 60947-5-2
Enclosure
brass, nickeled
Front cap
polycarbonate
Degree of protection
IP67 (IEC/EN 60529)
Connection
cable PVC (Ø max. 4.6 mm) 3 x 0.35 mm² or plug-in connector M12 x 1
Switching elements
1 NO contact, PNP, 3-wire
Rated switching distance sn
10 mm
Correction factors
Steel (S235JR) = 1; Stainless steel approx. 0.7; Brass approx. 0.5; Aluminium approx. 0.5; Copper approx. 0.4
Rated operating voltage range UB
10 … 30 VDC
Residual ripple
≤ 10 %
Switching current
max. 0.2 A
Voltage drop at Ie
max. 1.8 V
Current absorption
< 15 mA at 24 VDC
Hysteresis
approx. 10 %
Switching frequency
300 Hz
Repeatability
≤ 3 %
Protection circuit
Inductive interference protection, protection against polarity reversal, short-circuit and overload proof
LED display
lights up yellow on actuation
Ambient temperature
–25 °C … +85 °C

Downloads

EU Declaration of Conformity – IS M8 / IS M12 / IS M18 / IS M30

German, English

PDF 962 KB 13.11.2025
Please go to the relevant product pages for additional downloads.

Other interesting products

RF IS M30 FL

Wireless version

Wireless

Ex IS M30

Alternative version with explosion protection

Ex

IS M30 Extreme

Temperature resistant version with higher degree of protection

IS M30 full metal Extreme

Version with full metal housing made of stainless steel