Wireless foot switch
RF GFS KST Extreme
Corrosion-resistant aluminium enclosure
With thermoplastic protective shield
sWave® 2.4 GHz wireless technology
Point-to-Point connection
Pairing via internal push button
Frequency hopping: 32 frequencies (200 hops/s)
Easy programming of receiver
Transmission of battery voltage
Technical data
General technical data
Applied standards
EN 60947-5-1, EN 300 440-1 V1.3.1, EN 300 440-2 V1.1.2, EN 301 489-1 V1.6.1, EN 301 489-3 V1.4.1, EN 60950, EN 50371
Enclosure
aluminium die-cast, corrosion-resistant, powder-coated, passivated, anthracite grey, similar to RAL 7016
Protective shield
thermoplastic, glass-fibre reinforced, shockproof, RAL 2004
Pedal
thermoplastic, glass-fibre reinforced, shockproof, black
Degree of protection
IP67 (IEC/EN 60529)
Transmission incl. frequency change
max. 20 ms
Synchronisation after sleep mode
max. 200 ms
Current consumption
active: 21 … 25 mA
sleep mode: approx. 56 μA
Ambient temperature
–20 °C … +65 °C
Mechanical life
> 1 million operations
Wireless approvals
Europe: RED 2014/53/EU
USA: FCC - XK5-SW100AMBINT
Canada: IC - 5158A-SW100AMBINT
d
Wireless technology
Protocol
sWave®
Frequency
2.4 - 2.4835 GHz
Transmission power
1 mW
Data rate
250 kbps
Wireless range
max. 20 m indoors
Channel spacing
500 kHz
Output power
- 6 dBm e.i.r.p (0 dBm at 50 Ohm)
Input sensitivity
up to -98 dBm (-102 dBm at 50 Ohm)
Modulation type
2-FSK
Voltage supply
Voltage source
lithium battery Tadiran SL-2770 (replaceable)
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
8.5 Ah
Battery life
approx. 10 years unused, approx. 240 days when operation per h is 10 mins (8 h/d)
