Product features
Temperature resistant from -40 °C to +80 °C
High degree of protection IP66 / IP67
Corrosion-resistant aluminium enclosure
Screws and belt-alignment roller made of stainless steel
With staggered contacts, adjustable from 5° to 35°
Belt alignment lever adjustable in 12° steps using a self-locking mechanism
Rear and base mounting possible
Indicator lamp 24 VAC/DC (red)
Technical data
General technical data
- Applied standards
- EN 60947-5-1
- Enclosure
- aluminium die-cast, corrosion-resistant, powder-coated, passivated, shockproof, anthracite grey, similar to RAL 7016
- Cover
- aluminium die-cast, corrosion-resistant, powder-coated, passivated, shockproof, signal yellow, similar to RAL 1003
- Calotte
- polycarbonate, shockproof, self-extinguishing UL 94 V-0, red transparent, similar to RAL 3000
- Tightening torque
- cover screws: max. 2.5 Nm
- Degree of protection
- IP66/IP67 (IEC/EN 60529)
- B10d (10 % load)
- 2 million
- TM
- max. 20 years
- Contact material
- silver
- Switching elements
- 2 NC/2 NO contacts, type Zb
- Switching system
- snap action, positive break NC contacts A
- Switching points
- adjustable 5° to 35°; pre-adjustment setting 2 x 10°
- Connection
- screw connection terminals
indicator lamp: wire 2 x 0.9 mm², AWG 18, wire length approx. 150 mm, with conductor ferrules
- Cable cross-section
- min. 0.5 mm², max. 2.5 mm² (incl. conductor ferrules)
- Cable entry
- 2 x M25 x 1.5
- Rated impulse withstand voltage Uimp
- 6 kV
- Rated insulation voltage Ui
- 400 V
- Conventional thermal current Ithe
- 4 A
- Conditional short-circuit current
- 1100 A
- Rated operating current/voltage Ie/Ue
- 4 A/400 VAC; 0.25 A/250 VDC; 0.55 A/125 VDC; 2.5 A/48 VDC; 3 A/24 VDC
- Utilisation category
- AC-15; DC-13
- Short-circuit protection
- 4 A gG/gN fuse
- Rated operating voltage range UB
- Indicator lamp: 24 VAC/DC +10/-15 %
- Rated operating current Ie
- Indicator lamp: ∼ 15 mA
- Mechanical life
- > 1 000 000 operations at max. 45° operating angle
- Admissible belt speed
- 7 m/s for 3 h with a force of 50 N
- Operation cycles
- max. 600/h
- Ambient temperature
- –40 °C … +80 °C
- Degree of pollution
- 3
- Actuating moment
- approx. 4 Nm / 110 Nm (max. permissible actuating moment)
- Approvals
- da
- Weight
- 2000 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
Switching points
Downloads
Variants / Options
The following variants / options are available on request:
Pressure equalization element
Gold-plated contacts
Loading...
