Emergency pull-wire switch

ZS 92 S 22 VD F -40°C ... +85°C IP66/67 Extreme

Article no.: 1457232

Standard version

Product features

Temperature resistant from -40 °C to +85 °C
High degree of protection IP66 / IP67
Corrosion-resistant aluminium enclosure
Wire length up to 2 x 100 m
Release by lever
F = Reset lever on front
Rear and base mounting possible
Wire pull and breakage detection

Technical data

General technical data

Applied standards: EN 60947-5-1, EN 60947-5-5, EN ISO 13850, EN ISO 13849-1, EN 60529, EN 620-5.7.2.9, AS 1755-2000-2.7.9.1, AS/NZS 4024.3610:2015-2.10.6.2

Enclosure: aluminium die-cast, corrosion-resistant, powder-coated, passivated, shockproof, anthracite grey, similar to RAL 7016

Cover: aluminium die-cast, corrosion-resistant, powder-coated, passivated, shockproof, signal yellow, similar to RAL 1003

Actuating lever: aluminium die-cast, corrosion-resistant, powder-coated, passivated, shockproof, signal red, similar to RAL 3001

Reset lever: aluminium die-cast, corrosion-resistant, powder-coated, passivated, shockproof, sky blue, similar to RAL 5015

Screws: stainless steel

Tightening torque: cover screws: max. 2.5 Nm
actuator screws: max. 6 Nm

Degree of protection: IP66/IP67 (IEC/EN 60529)

B_10d (10 % load): 100 000

T_M: max. 20 years

Switching system: snap action, positive break NC contacts A

Switching elements: 2 NC/2 NO contacts, type Zb

Connection: screw connection terminals

Cable cross-section: 0.5 ... 2.5 mm² (incl. conductor ferrules)

Cable entry: 2 x M25 x 1.5

Rated impulse withstand voltage U_imp: 6 kV

Rated insulation voltage U_i: 400 V

Conventional thermal current I_the: 6 A

Conditional short-circuit current: 1100 A

Rated operating current/voltage I_e/U_e: 6 A/400 VAC

Utilisation category: AC-15

Short-circuit protection: 6 A gG fuse

Mechanical life: > 50 000 operations

Max. wire length: 2 x 100 m

Note: At 3 m distance intermediate wire supports are required. Two compensation springs type ZS 92 S must be installed, see accessories.

Ambient temperature: –40 °C … +85 °C

Degree of pollution: 3

Actuating force: actuating lever approx. 30 N; reset lever approx. 40 N

Approvals: ßda

Weight: 2260 g

Dimensional drawing

Further drawings

Contact diagram

S1 - Switch insert 1
S2 - Switch insert 2

Switching diagram

U Latching point
V Wire breakage detection
W Wire pull detection
S1 - Switch insert 1
S2 - Switch insert 2

Switch inserts

S1 - Switch insert 1
S2 - Switch insert 2

Downloads

Mounting instructions

Declarations of Conformity

Certificates

Data sheets

STEP-Files

Mounting and wiring instructions – ZS 92 S Extreme

German, English, French, Italian, Portuguese, Russian

PDF3 MB 02.12.2025

SIL application notes – ZS 92 S

English

PDF2 MB 25.11.2025

Variants / Options

The following variants / options are available on request:

Version with Si-Bus
Degree of protection IP69
Pressure equalization element

to your contact persons

Other interesting products

Ex ZS 92 S

Alternative version with explosion protection

ZS 92 S KST -40°C ... +70°C IP66/67 Extreme

Version with thermoset enclosure