Product features
Metal enclosure
Mounting details to EN 50041
Wiring compartment
Notes
The actuator is not included in the delivery of the switches.
Technical data
General technical data
- Applied standards
- EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
- Enclosure
- aluminium die-cast, powder-coated
- Switch type
- type 2
- Coding level
- low coding
- Degree of protection
- IP67 (IEC/EN 60529)
- B10d (10 % load)
- 2 million
- TM
- max. 20 years
- Contact material
- silver
- Switching system
- slow action, positive break NC contacts A
- Switching elements
- 2 NC/1 NO contact, type Zb
- Connection
- screw connection terminals
- Cable cross-section
- max. 1.5 mm² (incl. conductor ferrules)
- Cable entry
- 1 x M20 x 1.5
- Rated impulse withstand voltage Uimp
- 4 kV
- Rated insulation voltage Ui
- 400 V
- Conventional thermal current Ithe
- 1.5 A
- Rated operating current/voltage Ie/Ue
- 1.5 A/230 VAC; 0.27 A/250 VDC
- Utilisation category
- AC-15; DC-13
- Short-circuit protection
- 1.5 A gG fuse
- Operation cycles
- max. 1800/h
- Ambient temperature
- –20 °C … +80 °C
- Mechanical life
- > 1 million operations
- Approvals
- a
- Weight
- 280 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
T Positive break travel/angle
Note
Inserted position of actuator = 0 in switching diagram.
The actuator is not included with the switches.
Downloads
Variants / Options
The following variants / options are available on request:
Actuator head can be repositioned in factory by 4 x 90°
Loading...
