Product features
sWave® wireless technology
Time of flight sensor
Power supply by Lithium battery (replaceable)
Easy programming of receiver
LBT - Listen before Talk Firmware
Notes
Factory delivery with battery type SL-760 (AA).
Technical data
General technical data
Applied standards
EN IEC 60947-5-2, EN 55011, EN IEC 61000-6-2, EN IEC 61000-6-3, EN 301 489-1, EN 301 489-3, EN 300 220-1, EN 300 220-2
Enclosure
thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
Tightening torque
M4 enclosure mounting screws: max 1.2 Nm
M2.5 cover screws: approx. 0.45 Nm
Degree of protection
IP54 (IEC/EN 60529)
Sensor
logging with IR laser
Laser class
Class 1 to EN 60825-1; 950 nm
Ambient temperature
0 °C … +65 °C
Telegram rate
max. 7200 telegrams with repetitions/h
Switching frequency
0.33 Hz
Switching distances
25 cm
Accuracy
± 20 mm
Field of view
27°
Cycle time
3 s
Hysteresis
one side, default 4 cm
Standby current
200 µA
Actuating time
min. 20 ms
Note
status signal – can be individually configured via radio receiver (delivery state: without status signal)
LBT – can be deactivated via radio receiver (e.g. in conjunction with repeaters)
transmission of battery voltage and switching condition
Wireless approvals
Europe: RED 2014/53/EU
Wireless technology
Protocol
sWave®
Frequency
868.3 MHz (Europe)
Transmission power
< 25 mW
Data rate
66 kbps
Channel bandwidth
350 kHz
Wireless range
max. 450 m outdoors, max. 40 m indoors
Modulation type
2-FSK
Voltage supply
Voltage source
lithium battery Tadiran SL-2770 (C), replaceable
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
8.5 Ah
Battery life
Typical values with default settings.
Actuation interval
10 s: approx. 3.9 years
100 s: approx. 4.1 years
1,000 s: approx. 4.2 years
10,000 s: approx. 4.2 years
N.B.: Changes in battery lifetime are almost linear to changes in cycle time.
Alternative voltage supply
Voltage source
lithium battery Tadiran SL-760 (AA), replaceable
System
Li/SOCl2
Nominal voltage
3.6 V
Nominal capacity
2.2 Ah
Battery life
Typical values with default settings.
Actuation interval
10 s: approx. 1.0 years
100 s: approx. 1.1 years
1,000 s: approx. 1.1 years
10,000 s: approx. 1.1 years
N.B.: Changes in battery lifetime are almost linear to changes in cycle time.
Note
Below the sensor window a red LED indicates the battery status. It will light up for 1 second after transmission if the battery voltage is low. In this case assume that the battery is empty and needs to be changed.
Downloads
