Position switch
ES 41 D 2Ö-STECK -35°C Extreme
Article no.: 1032150Old article no.: 41521904
Product features
Metal enclosure
2 NC contacts
Cold-resistant down to -35 °C
Locking screws, brass nickel-plated
Actuator: Rocking lever D
Wear-resistant plastic roller
Lever can be repositioned in 10° steps clockwise or counter-clockwise
Actuator can be repositioned by 180°
Technical data
General technical data
- Applied standards
- EN 60947-5-1
- Enclosure
- aluminium die-cast, powder-coated, RAL 7016
- Cover
- steel, powder-coated, RAL 1003
- Degree of protection
- IP65 (IEC/EN 60529), only with plugged cable
- Contact material
- silver
- Switching system
- slow action
- Switching elements
- 2 NC contacts, type Zb
- Connection
- plug-in-connector M12 x 1, 4-poles
- Rated impulse withstand voltage Uimp
- 2.5 kV
- Rated insulation voltage Ui
- 400 V
- Conventional thermal current Ithe
- 6 A
- Utilisation category
- AC-15
- Rated operating current/voltage Ie/Ue
- 4 A/50 VAC
- Short-circuit protection
- 6 A gG fuse
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with a vertical actuating angle of 45°
- Operation cycles
- max. 1800/h
- Ambient temperature
- –35 °C … +80 °C
- Repeat accuracy of switching points
- ± 0.1 mm
- Approvals
- a
- Weight
- 222 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
Pin assignment
Downloads
Variants / Options
The following variants / options are available on request:
Metal roller
Plug-in connector M12 x 1, 4-pole
Position switch
ES 41 D 2Ö-STECK -35°C ExtremeArticle no.: 1032150Old article no.: 41521904
