Position switch with safety function
ES 13 W 1Ö/1S - 2m
Article no.: 1181842Old article no.: 13002003
Product features
Thermoplastic enclosure
Suitable for in-line mounting
With pre-wired cable
Actuator: Plunger with collar W
Watertight collar for protection against penetration of dirt
Technical data
General technical data
- Applied standards
- EN ISO 13849-1, EN 60947-5-1, EN ISO 14119
- Enclosure
- thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
- Switch type
- type 1
- Coding level
- no coding
- Tightening torque
- enclosure mounting screws: max. 5 Nm
- Degree of protection
- IP67 (IEC/EN 60529)
- B10d (10 % load)
- 2 million
- TM
- max. 20 years
- Contact material
- silver
- Switching system
- slow action, positive break NC contacts A
- Switching elements
- 1 NC/1 NO contact, type Zb
- Connection
- cable H05VV-F
- Cable cross-section
- 4 x 0.75 mm²
- Cable length
- 2 m
- Rated impulse withstand voltage Uimp
- 4 kV
- Rated insulation voltage Ui
- 250 V
- Conventional thermal current Ithe
- 6 A
- Rated operating current/voltage Ie/Ue
- 6 A/250 VAC; 0.25 A/230 VDC; 4 A/24 VDC
- Utilisation category
- AC-15; DC-13
- Short-circuit protection
- 6 A gG/gN fuse
- Safety class
- II
- Ambient temperature
- –20 °C … +75 °C
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with a vertical actuating angle of 0°
- Operation cycles
- max. 1800/h
- Repeat accuracy of switching points
- ± 0.1 mm
- Contact opening
- max. 2 x 4.5 mm
- Approvals
- a
- Weight
- 205 g
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
T Positive break travel/angle
Downloads
Variants / Options
The following variants / options are available on request:
Cable entry on side
Gold-plated contacts
Plug-in connector M12 x 1, 4-pole
Plug-in connector M12 x 1, 5-pole
Other interesting products
Position switch with safety function
ES 13 W 1Ö/1S - 2mArticle no.: 1181842Old article no.: 13002003
