Product features
Cold-resistant down to -40 °C
High degree of protection IP66
Thermoplastic enclosure with cable
Mounting details to EN 50047
Suitable for in-line mounting
Actuator: Parallel roller lever with collar WPH
Wear-resistant plastic roller
Silicone collar for protection against penetration of dirt
Technical data
General technical data
- Applied standards
- EN 60947-5-1
- Enclosure
- thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
- Degree of protection
- IP66 (IEC/EN 60529)
- Contact material
- silver
- Switching system
- snap action
- Switching elements
- 1 NC/1 NO contact, type Za
- Connection
- cable 4 x AWG 20
- Cable diameter
- 5.2 mm
- Cable length
- 5 m
- Cable cross-section
- 4 x AWG 20 (4 x 0.56 mm²)
- Rated impulse withstand voltage Uimp
- 4 kV
- Rated insulation voltage Ui
- 250 V
- Conventional thermal current Ithe
- 5 A
- Rated operating current/voltage Ie/Ue
- 5 A/250 VAC; 3 A/30 VDC
- Utilisation category
- AC-15; DC-13
- Short-circuit protection
- 5 A gG fuse
- Safety class
- II
- Ambient temperature
- –40 °C … +75 °C
- Mechanical life
- > 1 million operations
- Actuating speed
- max. 0.5 m/s with a vertical actuating angle of 30°
- Operation cycles
- max. 1800/h
- Repeat accuracy of switching points
- ± 0.1 mm
- Contact opening
- max. 2 x 4 mm
- Approvals
- a
Dimensional drawing
Further drawings
Contact diagram
Switching diagram
Downloads
Variants / Options
The following variants / options are available on request:
Cable entry on side
Gold-plated contacts
Latching element (On-/Off principle)
