Product features
High degree of protection IP69
Thermoplastic enclosure with wiring compartment
Long life
Differential inputs: Induction / magnetic operating principle
Internal monitoring, high manipulation protection
Potential-free outputs
Signalling contact
Status LED
1 NO/2 NC contacts
Actuating plane: actuating from the top "T"
Notes
The actuator is not included in the delivery of the switches.
1 cable gland M20x1.5 - IP69 and 2 locking screws M20x1.5 included in delivery.
Technical data
General technical data
- Applied standards
- EN 61000-6-1, EN 61000-6-2, EN 61000-6-3, EN 61000-6-4, EN 60947-5-2, EN 60947-5-3, EN ISO 14119, EN 60204-1, EN ISO 13849-1, EN 62061, 2004/108/EG
- Enclosure
- thermoplastic, glass-fibre reinforced, shockproof, self-extinguishing UL 94 V-0
- Sensor type
- type 4 interlocking device
- Coding level
- low coding
- Tightening torque
- enclosure mounting screws: max. 2 Nm
cover screws: max. 1.5 Nm
actuator screws: max. 2 Nm
- Degree of protection
- IP69 (IEC/EN 60529)
- Rated switching distance sn
- 12 mm (10 mm with flush mounting)
- Assured switching distance »ON« sao
- 10 mm (8 mm with flush mounting)
- Assured switching distance »OFF« sar
- 25 mm
- Hysteresis
- approx. 6 mm
- Sideways tolerance
- ≤ 3 mm
- Repeatability
- ± 1 mm
- Rated operating current/voltage Ie/Ue
- 140 mA/24 VDC ± 15 %
(reverse voltage protected);
output contacts: max. 3 A/24 VAC/DC, min. 10 mA/5 VAC/DC;
signalling contact: max. 1 A/24 VAC/DC, min. 100 μA/100 mVDC
- No-load supply current I0
- ≤ 70 mA
- Short-circuit protection
- Ue: 0.25 A (slow blow);
output contacts: 4 A (gG) incoming series-connected
- Outputs
- 2 enabling paths (1 NO/1 NC)
1 signalling contact (1 NC)
- Switching voltage
- max. 30 VAC/DC
- Conditional short-circuit current
- 100 A
- Utilisation category
- AC-15; DC-13 (output contacts)
AC-12; DC-12 (signalling contact)
- Rated insulation voltage Ui
- 250 VAC
- Rated impulse withstand voltage Uimp
- 1.5 kV
- Voltage drop at Ie
- max. 0.6 V
- Overvoltage category
- III
- Switching frequency
- max. 1 Hz
- Attendance delay tv
- < 300 ms
- Risk time
- max. 165 ms
- Degree of pollution
- 3
- Ambient temperature
- 0 °C … +55 °C
- Storage and shipping temperature
- –20 °C … +70 °C
- Mechanical life
- 50 mio. operations
- Contact material
- output contacts: AgSnO self-cleaning, positive-guided; signalling contact: AgNi, gold-plated
- Contact resistance
- output contacts: 100 mΩ in new condition; signalling contact: max. 30 mΩ
- Connection
- wiring compartment with socket screw clamps 8-pole
- Cable entry
- 3 x M20 x 1.5 (for cable glands only) (press-out blanks in enclosure)
- Cable cross-section
- min. 0.14 mm² (AWG 28), max. 1.5 mm² (AWG 16)
- Weight
- 220 g
Safety-relevant data
- EN ISO 13849-1
- Performance Level PL e
- Category
- 3
- B10d (10 % load)
- 20 million
- TM
- max. 20 years
- MTTFd
- 100 years
- DC/DCavg
- 96 %
- EN 62061
- SIL CL 3
- PFHd
- ≥ 4.29 x 10-8 1/h
- hop
- 8 h/day
- dop
- 220 days/year
- tzyklus
- 20 s
- Note
- The safety-related data are based on a load of 24 V / 0.1 A / DC-1 for the enabling paths. With higher load currents for the enabling paths and other requirement rates nop, the safety-related data vary from the given data and can be provided on request.
Dimensional drawing
Further drawings
Contact diagram
Monitoring of antivalence required
Actuating planes
Axial misalignment
Approach from side
Minimum distance 2 mm for approach from side.
Downloads
Loading...
